最も経済的なデジタル pH センサー電極プローブ RS485 4 ～ 20mA pH 電極

基本情報

モデル番号。	CS1701D
温度補償	NTC10K
インストールスレッド	NPT3/4インチ
正確さ	+/- 0.05pH
測定範囲	0-14pH
プローブの種類	電極の種類
生産工程	統合
設置タイプ	NPT3/4''
IP等級	IP68
出力信号の種類	デジタルタイプ
出力ステータス	通常閉
接触	接触
輸送パッケージ	カートンボックス
仕様	ガラス/銀+塩化銀
商標	ツインノ
起源	中国、上海
HSコード	9027
生産能力	3000個/月

梱包と配送

パッケージサイズ 21.00cm * 10.00cm * 7.00cm パッケージ総重量 1.000kg リードタイム 15 日 (1 - 50 個)
30日（51～200個）
500 Pieces) br h5Product Description/h5 br CS1701D Digital pH SensorbrDesigned for strong acid, strong base, wastewater, and chemical process.brEasy to connect to PLC, DCS, industrial control computers, general-purpose controllers, paperless recording instruments or touch screens, and other third-party devices.br CS1701D pH electrode adopts the most advanced solid dielectric in the world and large-area PTFE liquid junction. Not easy to block, easy to maintain. The long-distance reference diffusion path greatly prolongs the service life of the electrode in harsh environments. With a built-in temperature sensor (NTC10K, Pt100, Pt1000, etc. can be selected according to user requirements) and a wide temperature range, it can be used in explosion-proof areas. The newly designed glass bulb increases the bulb area, prevents the generation of interfering bubbles in the internal buffer, and makes the measurement more reliable. Adopt PPS/PC shell, upper and lower 3/4NPT pipe thread, easy to install, no need for sheath, and low installation cost. The electrode is integrated with pH, reference, solution grounding, and temperature compensation. The electrode adopts a high-quality low-noise cable, which can make the signal output longer than 20 meters without interference. The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of low conductivity and high purity water. table>